B.I.P.C
BASPARAN COMPANY
LDPE – PLANT
INTRODUCTION
LD Plant is designed for nominal 100,000 metric tons per year high pressure polyethylene plant.
Designer & supervisor of LD Plant for early I.J.P.C (Now B.I.P.C) was TOYOSODA. This
company has got the license for erection of LD plant, from USA NDCC.
The construction contract for this plant is made between (IJPC) IRAN & TOYOSODA and the
design basis was discussed and determined at the design conference held between them. The
required production is achieved in two autoclave reactor lines, each rated at nominal 50,000 metric
tons per annual on-stream time of 8,000 hours. The basic process consists of compression, reaction,
palletizing, conveying, storage, packaging, catalyst and modifier supply.
PLANT CAPACITY& PLANT SECTIONS
IJPC initial high pressure polyethylene plant (LD Plant) employing high pressure autoclave reactor
vessels is nominally rated at 100, 000 metric tons per 8,000 hours. The plant consists of two reactor
lines, each in the same design feature, of which capacity is accordingly nominal 50,000 metric tons
per year on the basis of 8,000 hour of annual on stream time.
Plant sections are as follows:
1- Synthesis Section (# 100)
2- Production Finishing, Packaging Section (# 200)
3- Catalyst Section (# 300)
4- Modifier Section (# 400)
5- Lubricating Oil Section (# 600)
6- Waste Treatment Section (# 800)